BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Faxing17
Inserting plain paper
To avoid pages being drawn in together, always fan out the pages first to separate them, then tap down before placing them in the paper feeder.
Inserting documents for sending
Place up to 5 sheets into the automatic document feeder, making sure the side to be sent is facing away from you.
When the document has been inserted properly, the display shows DOCUMENT READY and the bottom line shows the contrast setting NORMAL.
Contrast
You can adjust the brightness for sending or copying light or dark documents.
NORMAL should be suitable for most documents.
Select DARK when sending light originals and LIGHT when sending dark originals.
1.Press 
repeatedly until the display shows FAX SET UP then press 
.
2.Press 
to display VARIOUS SETTINGS then press 
until
CONTRAST:NORMAL is displayed.
3.Press 
or 
to switch between NORMAL, DARK and LIGHT.
4.Press 
to confirm and then 
to return standby.
The plain paper feeder holds up to 40 sheets of
The document feeder holds up to 5 sheets of 70 – 110g/m2 paper.
If the document does not feed properly into your BT PaperJet 35, press 
to eject the page.
IMPORTANT
Do not insert into the document feeder:
Pages smaller than A5.
Newspaper pages (because of printer’s ink).
Pages with staples or paperclips, sticky tape or glue.
Creased or torn pages.
Wet paper or paper with wet correction fluid.
Glossy or laminated paper.
Paper thicker than 110g/m2 or thinner than 70g/m2.
