BT BT PaperJet 35 manual PRINT SETTING? - press

BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672

Faxing 19

2.Press repeatedly until the display shows TX FROM MEMORY then press . The document is scanned.

3.When scanning is completed the document is assigned a reference number, e.g. DOC.N.XXXX and the display shows TYPE TIME HH:MM.

4.Enter the time you want the fax to be sent, e.g. . for 6.20pm.

5.Press to confirm. Display shows TYPE NUMBER NUM/TOUCH/SPEED.

6.Enter the number or use the one-touch or speed dial directories.

7.Press .

You can now enter another number to send the same document to another person.

If the power fails, the document stored in the memory will be cancelled.

Or

Press again to confirm. The display shows AUTOMATIC MEMORY TX.

Resend, change number or cancel a stored fax

1.Press repeatedly until the display shows TX FROM MEMORY then press . Display shows ALREADY ENTERED.

2.Press display shows PRINT SETTING?

3.Press or to switch between the options:

PRINT SETTING? – press to print a status report of the last

fax stored in the memory. After printing, the fax returns to standby.

CANCEL SETTING? – press to cancel the document and return to standby.

CHANGE PARAM? – press to change the time the fax will be sent.

4.Press to confirm. Display shows TYPE NUMBER.

5.Enter the number or use the one-touch or speed dial directories.