As shown in the diagram above, the AirStation Pro has four LED indicators, each indicator relaying important information to the user. This information is described in the following table:
LED Indicator | Message |
|
|
POWER | When the AirStation Pro is connected to a power supply, the LED |
| indicator will display green continuously. |
|
|
WIRELESS | When the AirStation Pro is successfully connected to a Wireless |
| LAN, the LED indicator will flash green. |
|
|
ETHERNET (Wired | When the AirStation Pro is connected to a |
LAN) | the LED indicator will flash. |
| 10Mbps: Indicator will flash orange. |
| 100Mbps: Indicator will flash green. |
|
|
DIAGNOSTICS | This light will flash when an error has occurred. The flashing fre- |
| quency indicates the error type, see “Diagnostic Indicator” on |
| page 23 |
|
|
Table 6: LED indicator function
Diagnostic Indicator
Each flash of the Diagnostic indicator conveys a particular error message. These are as follows:
No. of flashes | Status | Explanation |
|
|
|
1 | RAM check error | Cannot read or write to the internal mem- |
|
| ory. |
|
|
|
2 | ROM check error | Cannot read or write to the flash ROM. |
|
|
|
3 | Ethernet LAN error | The Ethernet LAN controller is broken. |
|
|
|
4 | Wireless LAN error | The Wireless LAN controller is broken. |
|
|
|
5 | Clock error | The Clock is not set correctly or the clock |
|
| battery may be depleted. |
|
|
|
9 | Error other than above |
|
|
|
|
Table 7: Diagnostic indicator information
23Product Overview
