Buffalo Technology WLA-AWCG manual Network adapter drivers have not been installed

Solutions:

To correct this:

1Ensure that the network adapter is installed in the computer.

For instructions on how to do this, refer to the AirStation Pro Installation chapter, “Network adapter installation” on page 29.

2If the network adapter still cannot be found, remove the adapter and then re- install it. Refer to your Windows documentation for instructions on how to do this.

Cause 2:

The network adapter drivers have not been installed.

Solutions:

Ensure that the correct drivers for the network adapter are correctly installed.

If you are using the Wireless LAN card, refer to the Wireless LAN Card WLI-PCM L11 User’s Manual for information. If you are using any other type of network adapter, refer to the appropriate adapter documentation.

Cause 3:

Network adapter is configured incorrectly.

The network adapter may not be configured to meet the AirStation Pro requirements.

Solutions:

Check the following items and re-install the network adapter again. See also the AirStation Pro Installation chapter, “Network adapter installation” on page 29.

63Troubleshooting WLA-AWCG User Manual