Buffalo Technology WLA-AWCG manual Network adapter is displayed with

Network adapter is displayed with “!”.

Figure 52: Network adapter displayed with “!”

If this symbol is displayed beside the network adapter, you must do one of the following to correct the error:

„Re-install the network adapter driver, or,

„Change the resources manually to avoid the conflict. Refer to your Windows documentation for information on how to do this.

Network card is displayed with “X”.

If this symbol is displayed, this means that the adapter has not been installed properly or that the settings are invalid.

To correct this error, you must do both of the following:

1Re-install the network adapter.

2Ensure that the settings are valid.

Troubleshooting 64

WLA-AWCG User Manual