Buffalo Technology WLA-AWCG manual Specifying the IP address, Select Internet Protocol TCP/IP

Windows 2000

1Open the Local Area Connection Properties dialog box as shown in “Checking that the protocols are added” on pag e72.

2Click Install.

3Select Protocol and click Add.

4Select Internet Protocol (TCP/IP).

5Click OK.

The TCP/IP protocol is added.

You will be prompted to restart your computer at this point. Click No because you still have to specify an IP address. For instructions on how to do this, see “Specifying the IP address” on page 77.

A.4.3 Specifying the IP address

To complete the addition of the TCP/IP protocol to your PC, you must specify an appropriate IP address.

Note: A suggested IEEE IP default value is 192.168.x.x, where x is a value ranging from 0 to 255.

Follow the steps appropriate to the Windows version that you are using.

77 Appendix

WLA-AWCG User Manual