Buffalo Technology WLA-AWCG manual Network adapter fails at driver installation

6.2.3 Network adapter fails at driver installation.

Cause 1:

Drivers are not installed correctly.

Solutions:

To correct this error, re-install the drivers for the network adapter. Refer to your Windows documentation for information on how to do this.

If you have tried all of the above with no success, then it may be that the network card is not functioning correctly. You must then check your network card. Refer to the Appendix for instructions on how to do this.

Cause 2:

The network adapter is not installed correctly.

Solutions:

To correct this:

1Ensure that the network adapter is installed in the computer.

For instructions on how to do this, refer to AirStation Pro Installation, “Network adapter installation” on page 29.

2If the network adapter still cannot be found, remove the adapter and then re- install it.

Refer to your Windows documentation for instructions on how to do this.

6.2.4AirStation IP address is not assigned

If you are unable to assign the IP address it could be due to the following reason:

Cause 1:

An invalid password has been entered.

Solutions:

To correct this, ensure that the password entered corresponds to the password set for the AirStation Pro.

65Troubleshooting WLA-AWCG User Manual