Buffalo Technology WLA-AWCG manual Routing Setup screen is displayed

The Routing Setup screen is displayed.

Figure 48: Routing Setup screen

3Set the IP address of the default gateway IP in the Default Gateway address field.

If there is no default gateway, leave the Default Gateway address field blank and click Set.

Note: If you have a DHCP server on your network, a default gateway address will be automatically assigned. This can be over-ridden by manually entering an IP address in the Default Gateway address field. It is recommended that you manually set a gateway address.

If you wish to create a routing table for routers that exist on the network, you must enter values in the Add Routing Table Entry.

1Enter the destination IP address in the Destination Address field.

2Enter the IP address for the gateway in the Gateway field.

3Enter the total number of routers to be passed in the Metric field. You must enter a value in the range of 1 - 15.

Configuring AirStation Settings 54

WLA-AWCG User Manual