Buffalo Technology WLA-AWCG manual Setting up the Packet Filter

5.2.10 Setting up the Packet Filter

The Packet Filter feature can be used to prohibit transmission and reception of data which may cause abnormal operation.

The following restrictions can be implemented using the Packet Filter settings:

„Prohibit configuration from a Wireless LAN.

„Prohibit configuration from a Wired LAN.

„Prohibit configuration over AirStation.

To configure the Packet Filter settings, follow these steps:

1Open the Basic Settings screen. For instructions on how to do this, see “Displaying the Settings screen” on page 43.

2Click Packet Filter on the Advanced Settings menu in the left panel. The Packet Filter Setup screen is displayed.

Figure 49: Packet Filter Setup screen

3Select the setting you want to make from the Filter Setting drop-down list. Click Add the Rule.

4A confirmation screen is displayed, indicating your rule has been added.

55Configuring AirStation Settings WLA-AWCG User Manual