Cabletron Systems SEHI100TX manual Management Terminal Setup Parameters

Management Terminal Setup

Management Terminal Setup Parameters

Table 7-2 lists the setup parameters for the local management terminal. If the terminal is a Digital Equipment Corporation VT320 terminal, press F3 to access the Setup Directory. If the local management terminal uses terminal emulation of the VT320, refer to the equipment user manual for setup procedures.

Table 7-2 Terminal Setup Parameters

Menu	Function	Selection
	Columns	80 Columns
Display Setup:	Controls	Interpret Controls
	Auto Wrap	No Auto Wrap
	Test Cursor	Cursor
General Setup:	Mode	7 Bit Control
	Cursor Keys	Normal Cursor Keys
	Transmit	Transmit = 9600
	Receive	Receive = Transmit
	XOFF	any option
	Bits, Parity	8 Bits, No Parity
Communications
	Stop Bit	1 Stop Bit
Setup:
	Local Echo	No Local Echo
	Port	DEC-423,
		Data Leads Only
	Transmit	any option
	Auto Answerback	No Auto Answerback
	Auto Repeat	any option
	Keyclick	any option
Keyboard Setup:
	Margin Bell	Margin Bell
	Warning Bell	Warning Bell
	Auto Answerback	No Auto Answerback

SEHI100TX User’s Guide 7-5