Cabletron Systems SEHI100TX manual Selecting the Appropriate Module/Port, Module Number Sequence

The Device Statistics Screen

UPDATE-FREQ

This command lets the user select the time interval between Stack/Module/Port counter updates. Choose update intervals in increments of 3 seconds, with the maximum interval being 99 seconds.

MODULE

This command lets the user view statistics for a selected module in the stack. The SEHI is Module 1 and each SEH in the stack follows in sequential order. Figure 7-9 shows each module number in the stack.

SEH - MODULE 5

SEH - MODULE 4

SEH - MODULE 3

SEH - MODULE 2

SEHI - MODULE 1

Figure 7-9 Module Number Sequence

PORT

Allows the user to view statistics for ports 1–24 of the selected module.

7.9.1Selecting the Appropriate Module/Port

When the Device Statistics screen first appears, statistics are displayed for Module 1 and Port 1. View statistics for another module and port by using the Module x or Port x commands at the bottom of the screen.

Use the following steps to select a module or port:

1.Use the arrow keys to highlight the Module or Port command.

2.Press the SHIFT and + or - keys until the desired module or port number appears.

3.Press ENTER. The selected Module and Port statistics appear.

SEHI100TX User’s Guide 7-23