Cabletron Systems SEHI100TX manual Stepping Through OIDs, Cycling Through OIDs

Chapter 7: Local Management

7.8.6Stepping Through OIDs

Use the following steps to STEP through OIDs (the user can step through only after a GETNEXT):

1.Highlight STEP, using the arrow keys, then press ENTER. “Specify OID” appears.

2.Enter the OID (only the suffix is necessary) and press ENTER. The Tools screen will begin to scroll one OID at a time, through all of the sublayers of the MIB available for that OID.

7.8.7Cycling Through OIDs

Use the following steps to CYCLE through an OID:

1.Use the arrow keys to Highlight CYCLES, then press ENTER.

2.Enter the number of cycles desired to occur after “ENTER CYCLE COUNT:”, then press ENTER.

3.Enter how many seconds delay desired between get next requests after “ENTER CYCLE DELAY (secs):”, then press ENTER.

7.8.8Exiting the SNMP Tools Screen

To exit the SNMP Tools Screen:

1.Use the arrow keys to highlight the RETURN command.

2.Press ENTER. The Feature Selection screen appears.

7-20 SEHI100TX User’s Guide