Cabletron Systems STHI manual Component Status Screen, Next and Previous

The Component Status Screen

5.6.4NEXT and PREVIOUS

The Chassis Status View screen lists ports in ranges of 12 at a time. Use the NEXT and PREVIOUS screen commands to view ports from the next or previous range.

5.6.5ENABLE ALL PORTS

Invoke this screen command to enable all ports in the stack. It is available only in ADMINISTRATIVE mode.

5.6.6REFRESH

The user may toggle this screen command to select screen refresh intervals from 3 to 10 seconds.

5.7 The Component Status Screen

Access the Component Status screen (Figure 5-11) from the Device Status menu.

STHI LOCAL MANAGEMENT Flash Image Version: 1.00.00

COMPONENT STATUS VIEW

COMPONENT NAME

STHI Chassis MGR

STHI LIM

STHI Protocol stack

STHI SNMP agent

Network 1

REFRESH 3sec RETURN

Figure 5-11. Component Status Screen

The Component Status View screen is a read-only screen which lists the enabled/disabled status of the STHI hub’s operating system and associated components. (Software applications, resources, and functions registered in the STHI are known as components.) All compatible

Page 5-20