Cambridge Audio 340A Rear Panel Connections, AC power socket, Loudspeaker connections, Tape mon

REAR PANEL CONNECTIONS

azur 340A Integrated Amplifier

Designed and Engineered in London, England

Power Rating:

230V AC

50Hz

:

uxA

CD

DAB / Tuner

VDD

MD / VA

Out-ecR

nI Tape

Max Power Consumption

345W

Caution

Risk of electric shock

Do not open

Left

Left

Avis

Risque de choc electrique

Ne pas ouvrir

Achtung

Vorm offnen des gerates

Right

Right

Netzstecker ziehen

CD

Rec-Out

Aux

Tuner / DAB

AV / MD

Tape In

DVD

AC power socket

Once you have completed all connections to the amplifier, plug the AC Power Cable into an appropriate mains socket. The amplifier is now ready for use.

Loudspeaker connections

The 340A has two sets of Loudspeaker terminals on the rear panel, speakers A and B. Speakers A are the main speaker terminals, speakers B are the secondary switchable speaker terminals. Connect the wires from your left channel loudspeaker to the LEFT + & - terminals, and likewise the wires from the right channel loudspeaker to the RIGHT + &

-terminals. In each case the red terminal is the positive output, and the black terminal is the negative input. Care should be taken to ensure no stray strands of wire are shorting speaker outputs together.

6azur integrated amplifier

ightR

A

eftL

ightR

B

eftL

Caution

Serial Number Label Removed

Power AC

Impedance 4 - 8 ohms

Loudspeaker Terminals

A

B

www.cambridge-audio.co.uk

Right

Left

Right

Left

Manufactured in an

ISO9002

approved facility

Note: This amplifier has been designed for use with loudspeakers that have a nominal impedance of between 4 and 8 ohms.

Please ensure that the speaker terminals have been tightened adequately to provide a good electrical connection. It is possible for the sound quality to be affected if the screw terminals are loose.

Tape mon

These sockets can be connected to a tape deck or to the analog sockets on a MiniDisc or CD recorder. Connect an interconnect cable from the recorder's Line Out sockets to the amplifier's Tape Monitor sockets. This monitor doubles up as the standard tape/recording medium input.

Note: When connecting a source component that has both an input and output i.e. a tape recorder, the output of should always be connected to the Tape Mon input. This will eliminate howlround if the wrong input channel is selected.