Canon 2 MC Recording from Another DV Device as a Still Image

100
E
Using the MultiMediaCard
(ELURA2 MC only)
Recording from Another DV Device as a Still Image
-ELURA2 MC only-
PHOTO
PHOTO
OFF
POWER
VCR
P
.SCAN
MOVIE
CARD
REC
CARD
PLAY
1. Connect the camera to the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows facing as shown above.
2. Prepare the otherdevice.
• Turn on the power and load a recorded cassette.
3. Load a MultiMediaCard. Then push the button next to the
POWER dial and hold, and turn the POWER dial to VCR.
• DV IN appears in the display.
• If you have a cassette inserted, make sure it is in stop mode.
Record images input through the DV in terminal onto the MultiMediaCard as still
images.
• The still image's data code will show the date and time it was originally
recorded.
Preparations
1. Start playback on the other device.
2. When the image you want to record appears in the display, press
the PHOTO button halfway down and hold it.
• The image appears as a still image in the display.
• The number of images that can still be recorded on the MultiMediaCard
appears in the display.
3. Press the PHOTO button fully down to record the image to the
MultiMediaCard.
• If you record an image onto a MultiMediaCard that was originally recorded in
the 16:9 mode for widescreen TV’s, the image will appear to be vertically
“squashed” (compressed).
• The shutter sound does not sound in VCR mode.
Recording
Side with arrow Side with arrow
: Signal flow
5_ELURA2_E(93-115) 7/27/00 14:51 Page 100