50
E
Using the Full
Range of Features
• If the subject is unsuitable for autofocus ( 125), the camera may not be
able to focus, and Fmay continue to flash white in the display. Adjust the
focus manually with the SELECT dial.
• If you are using manual focus ( 72), the Fmark starts as a continous
green mark. Focus with the SELECT dial.
2. Press the PHOTO button fully down to take the still picture.
• The camera takes the image immediately, and then records the “photo” to
the tape for approximately 6 seconds. During this time the camera also
records the sound, and the display shows the still picture.
• A counter display appears, and counts up to 6 seconds as the camcorder
records the picture. Fdisappears from the display.
• The camera returns to record pause mode.
• The camera automatically returns to record pause mode after recording a still
image for approximately 6 seconds. If a cassette is inserted and you turn the
POWER dial to OFF during those approximately 6 seconds, the camera will
respond only after recording is complete.
• The wireless controller ’s PHOTO button has no half-way setting. Press the
button fully and the camera immediately takes the “photo”.
• Only take “photos” where it is bright enough to see the image in the display.
• If you want to use an effect, make sure you set it before you take your picture.
3_ELURA2_E(33-79) 7/25/00 17:09 Page 50