E
Setting the data code
You can also choose to display camera data (shutter speed and exposure settings) in cassette data codes.
VCR
DISP.SET UP | DATA CODE•••DATE/TIME |
( 
34)
Using the Full Range of Features
To change, open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu.
Possible data code combinations:
DATA CODE |
|
| Date/Time & |
(cassette | Date/Time | Camera data | |
only) | Camera data | ||
D/TIME SEL. |
|
| |
Date |
| F32 | F32 |
JAN. 1,2000 | 1/2000 | ||
| 1/2000 | JAN. 1,2000 | |
Time |
| F32 | F32 |
12:00:00 AM | 1/2000 | ||
| 1/2000 | 12:00:00 AM | |
|
|
| F32 |
Date & Time |
|
| 1/2000 |
12:00 AM | F32 | 12:00 AM | |
| JAN. 1,2000 | 1/2000 | JAN. 1,2000 |
•The data code will read “– –
–During playback of a blank section of tape.
–If the tape was recorded before entering the date and time in the camera’s memory.
–If the tape was recorded on a camera without a data code function.
–If noise or tape damage prevents the data code from being read.
•If a recording made on ELURA2/ELURA2 MC is played back on a different DV camcorder, the data code may not be displayed correctly.
•The data code will appear in the display even if DISPLAYS ( 
132) has been set to OFF through the menu.
76
