?The PHOTO button doesn’t work.
?The image cannot be erased.
•The MultiMediaCard is not loaded ( 
94).
•The MultiMediaCard is full. Erase images ( 
104) or insert a new MultiMediaCard.
•You have reached the maximum file number. Set the file numbering to RESET through the menu ( 
96) and insert a new MultiMediaCard.
•You are using an unformatted MultiMediaCard. Format the card ( 
112).
•The image is protected ( 
103).
E
Miscellaneous
Problem
?The wireless controller doesn’t work.
?The power indicator is flashing.
?The camera malfunctions.
?The DV cable is connected correctly, but there’s nothing in the display.
?The camera becomes warm during use.
Cause and/or what to do about it
•The remote sensor mode is set to OFFB in the menu ( 
43).
•The remote sensor modes of the wireless controller and the camera itself are different ( 
43).
•The batteries are dead or not inserted.
•Check the screen displays ( 
132).
•External interference may cause the camera’s microprocessor to malfunction temporarily. If random letters appear in the display or if normal operation is interrupted, remove and then replace the power source.
•Remove the cable and then reconnect it or turn the power off and back on again.
•This is not a malfunction.
Information | Additional |
