Canon 2 MC instruction manual Tape in the camera, Playback tape

4_ELURA2_E(80-92) 7/25/00 17:16 Page 86

E

Preparations

The tape in the camera:

When using the ELURA2/ELURA2 MC’s A/V insert function, only record to tapes recorded in SP mode with continuously recorded time codes.

If there are non-recorded portions or portions recorded in LP mode on the tape, recording will stop.

The playback tape:

Use only tapes without non-recorded portions.

If there are non-recorded portions or changes in the recording mode, you may not be able to insert A/V correctly.

You cannot insert A/V in the following cases:

•The playback tape has been poorly recorded.

•During special playback: fast forward playback, rewind playback or slow playback etc. (analog only).

Editing

TV:

You cannot insert A/V from a TV program with anomalous synchronized signals, such as when the program itself received poor signals.

Example recording from a VCR

1.Connect the camera to the VCR.

2.Prepare the VCR and TV.

•Set the TV/Video selector on the television to Video. For further details, see “Connections for Playback on a TV Screen” on p. 28.

•Turn on the VCR and load a recorded cassette.

•See your TV and VCR instruction manuals for details.

3.Turn the camera’s POWER dial to VCR and load a recorded cassette.

•Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position).

86