Canon manual 104

3

Printer Settings Menu

NOTE

•[Rotate+Collate] and [Rotate+Group] are available if the paper size is LTR, LTRR, A4, A4R, JIS-B5, or JIS-B5R.

•If [Rotate+Collate] or [Rotate+Group] is selected, part of the print image may be cut off when the image is rotated. You need to load the same size paper as the original in the paper drawers in both landscape and portrait positions. If you do not, all the sheets will be printed in the orientation that the loaded paper is in.

•[Offset+Collate] and [Offset+Group] are available if the following paper sizes are selected.

-Finisher-Z1: 11" x 17", LGL, LTR, LTRR, A3, B4, A4, A4R, B5

-Finisher-Y1 or Saddle Finisher-Y2: 11" x 17", LGL, LTR, LTRR, STMT, EXEC, A3, B4, A4, A4R, B5, A5

•When you select [Staple+Collate] or [Staple+Group], you can select the stapling position.

	Corner			Double			Corner		Double
(Upper-Left)					(Top)	(Upper-Right)				(Right)
		ABC			ABC			ABC			ABC
		ABC			ABC			ABC			ABC
	Corner			Double			Corner		Double
(Lower-Right)			(Bottom)			(Lower-Left)					(Left)
		ABC			ABC			ABC			ABC
		ABC			ABC			ABC			ABC

•When you are stapling paper in landscape orientation, the image orientation and the staple position may not match.

3-32Settings Menu