NOTE
Even if [Output] is selected and the data is highly compressed, the data may still be too large to be stored in the machine's memory. In this case, the job is canceled and an error is logged in the Print Log. (See Chapter 5, "Checking Job and Device Status," in the Reference Guide.)
Initialize—
The menu settings can be reset to the factory defaults by initializing the printer settings.
If you select Initialize, the confirmation message <Is it OK to initialize the settings?> is displayed. If you select [Yes], the settings are initialized. If you select [No], the settings are not initialized.
IMPORTANT
Do not turn OFF the machine while the settings are being initialized, as doing so may damage the machine's memory.
3
Printer Settings Menu
Settings Menu |