Data that should be printed on the same page is printed on two separate pages.

Cause 1 The application software's "Line spacing" and "Number of lines on a page" settings are not correct.

Remedy Change the settings so that the data fits on one page and print the data again. (See the application software manual.)

Cause 2 The 'Timeout' setting is too short, when the 'Personality' setting is set to [Auto].

Remedy Change the 'Personality' setting to a setting other than [Auto], or increase the 'Timeout' setting. (See "Personality," on p. 3-42,and "Timeout," on p. 3-27.)

Print Quality Problems

The printout is too light or too dark.

Cause 1 The toner density settings are not correct.

Remedy Adjust the toner density and print the data again. (See "Density," on p. 3-17.)

Cause 2 'Toner Save' is set to [On].

Remedy Set 'Toner Save' to [Off] in the printer driver and print the data again. (See the Help function on the printer driver.)

NOTE

You can also perform the same procedure from the touch panel display. (See "Toner Save," on p. 3-18.)

Cause 3

The machine's density settings are not adjusted correctly.

 

 

Remedy

Perform an Automatic Gradation Adjustment. (See Chapter 4, "Customizing

 

Settings," in the Reference Guide.)

6

Troubleshooting

Printing Problems

6-17