Skipping an Error during Printing

If an error occurs during printing, you may be able to continue printing depending on the error by pressing [Auto Continue]. However, an error is only temporarily cleared. Data may also not be printed correctly. For information on types of errors that can be temporarily cleared with Auto Continue, see "When a Message Is Displayed," on p. 6-4.

Handling a Job from the Print Basic Features Screen

To bypass an error and continue printing from the Print Basic Features screen, follow the steps below.

1 Press [➞] ➞ [Print Job].

NOTE

•You can set the Print Basic Features screen to be the initial screen, when the main power is turned ON or after an Auto Clear, with "Initial Function and Function Order Settings" in Common Settings (from the Additional Functions screen). (See Chapter 4, "Customizing Settings," in the Reference Guide.)

•Depending on the system configuration, the Print Basic Features screen or the function key is displayed in the front page of the touch panel display as the initial screen.

2 Press either [My Job Status] or [Status].

2

Handling Different Print Jobs

Checking and Changing Print Jobs

2-25