■Density
1 to 5; 3*
This setting enables you to adjust the number density and has 5 levels you can adjust, with level '3' (middle level) being the default setting. Selecting '1' makes the number lighter, and selecting '5' makes it darker.
NOTE
This function is only available if 'Copy Set Numbering' is set to [On].
■Color
Yellow, Magenta, Cyan, Black*, Red, Green, and Blue
This setting enables you to specify the color of the copy number.
NOTE
This function is only available if 'Copy Set Numbering' is set to [On].
■Number Position Vertical/Number Position Horizontal
The position of the copy numbers specified with 'Print Position' can be finely adjusted by offsetting them in the horizontal or vertical directions. The adjustment can be made in increments of 1/16" (1 mm) from
You can increase or decrease the setting value to adjust the print position of the copy numbers, as described below.
Number Position Vertical: Increasing the setting value moves the print position in the downward direction of the paper. Decreasing the setting value moves the print position in the upward direction of the paper.
Number Position Horizontal: Increasing the setting value moves the print position to the right. Decreasing the setting value moves the print position to the left.
| Horizontal "+" direction |
| |||
direction"+" |
|
|
|
| Original print position of copy numbers |
| 00001 | 00001 |
| ||
Vertical |
|
| |||
| 00001 | 00001 |
|
| |
|
|
|
| ||
|
|
|
|
|
|
3
Printer Settings Menu
Settings Menu |