PS Settings

NOTE

•These settings are only available when printing in the PS Printer.

•An asterisk (*) indicates the default setting in this section.

Job Timeout

0 to 3600 seconds; 0* seconds

This setting enables you to specify the amount of time before a job times out. If a job has not finished within the set time limit, the job automatically cancels.

Wait Timeout

0 to 3600 seconds; 300* seconds

This setting enables you to specify the amount of time the machine will wait for data sent from the host computer before it times out. If data is not received within the set time limit, the job automatically cancels.

Print PS Errors

On, Off*

This setting determines whether an error page is printed when an error is encountered.

3

Printer Settings Menu

PS Settings

3-65