You cannot store a secured print job.
Cause | The number of secured jobs stored in the machine has exceeded the maximum |
| capacity of 50 jobs, or the total number of pages that are stored or are in jobs |
| has exceeded the limit (6,000 pages). |
|
|
Remedy | Delete other secured jobs, or wait until those jobs have finished printing, then |
| print again. |
Printing Problems
Meaningless characters are being printed.
Cause 1 You have printed from Windows without installing the printer driver for Windows that was included with the machine.
Remedy Install the printer driver for Windows that was included with the machine and print the data again. (See Chapter 2, "Getting Started," in the PCL Driver Guide, the PS Driver Guide, or the UFR II Driver Guide.)
Cause 2
Remedy Reset the
A font that is different from the one specified is printed.
Cause | The 'Send According to Font Substitution Table' setting has been set on the |
| printer driver for Windows. |
|
|
Remedy | Set the 'Send According to Font Substitution Table' setting to the correct setting |
| and print the data again. (See the Help function on the printer driver.) |
The machine does not output a blank page.
Cause | 'Paper Save' in UFR II or PCL settings is set to [On]. |
|
|
Remedy | Set 'Paper Save' in UFR II or PCL settings to [Off]. (See "Paper Save," on p. |
|
6
Troubleshooting
Printing Problems |