[2-Sided]

This setting specifies whether to print on one-side or both sides

 

of the paper.

[Binding

This setting specifies whether to place the binding position

Location]

along the long edge or the short edge of the paper. If the

 

margin is specified on the touch panel display, the binding

 

margin position is automatically adjusted on the front and back

 

sides of the paper.

 

For more information, see "Margin," on p. 3-22.

[Finishing]*

[Rotate]*

[Offset]*

This setting specifies whether to print in pages or copies.

•If [Off] is selected, all copies of the same page are printed before the next page is printed.

•If [Collate (Page order)] is selected, all pages of each copy are printed before the next copy is printed.

•If [Group (Same pages)] is selected, all copies of the same page are printed before the next page is printed.

•If [Staple] is selected, all pages of each copy (collating) are printed and stapled.

•If the checkbox and [Collate (Page order)] are selected in [Finishing], all pages of each copy (collating) are printed, and rotates every other complete copy 90 degrees to indicate where each copy starts.

•If the checkbox and [Group (Same pages)] are selected in [Finishing], all copies of the same page are printed before printing the next page. It rotates every other complete set of pages 90 degrees to indicate where each new set starts.

•If the checkbox and [Collate (Page order)] are selected in [Finishing], all pages of each copy (collating) are printed, and every other complete copy is offset to indicate where each copy starts.

•If the checkbox and [Group (Same pages)] are selected in [Finishing], all copies of the same page are printed before printing the next page. Every other complete set of pages is offset to indicate where each new set starts.

5

How to Use the Direct Print Function

[Hole Punch]*

This setting allows you to punch holes in the printed-paper.

 

Select the checkbox and one of either [Left], [Right], [Top], or

 

[Bottom].

 

If you select both the staple and punch settings, specify the

 

punch and staple settings so the positions match. If the

 

positions do not match (for example, the staple position is on

 

the right and the punch position is on the left), both settings are

 

void and the paper is printed without either stapling or

 

punching.

Printing Directly from the Remote UI

5-25