6
Troubleshooting
You cannot print the last page.
Cause | The command that identifies the end of the data has not been sent from the PC. |
| (The Processing/Data indicator is blinking or lit.) |
|
|
Remedy | Clear the print data. (If you print from application software that does not have a |
| print function and the last page of data is not a full page, the data will remain in |
| the machine's memory.) (See Chapter 2, "Handling Different Print Jobs.") |
A print job that you have specified as
Cause 1 The paper size you have specified is not supported by
Remedy Change the print job settings and print the data again.
Cause 2 The settings for the front and back sides of the paper are different.
Remedy Change the print job settings and print the data again.
The data does not fit on the page properly.
Cause 1 The paper is not in the correct position.
Remedy Make sure the machine is set correctly and try printing again. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
Cause 2 The data is outside the printable area.
Remedy 1 Insert margins around the data and print the data again. (See the Help function on the printer driver or the application software manual.)
Remedy 2 Change the 'Scaling' settings on the printer driver and print the data again. (See Chapter 3, "Basic Print Options," in the PCL Driver Guide, the PS Driver Guide, or the UFR II Driver Guide.)
The printing location has slipped.
Cause 1 | Margin, Offset Short Edge, or Offset Long Edge in the printer settings menu |
| have been changed. |
|
|
Remedy | Set Margin, Offset Short Edge, and Offset Long Edge to '0.00' and print the data |
| again. (See "Margin," on p. |
| on p. |
|
|
Cause 2 | The application software's top margin and paper location settings are not |
| correct. |
|
|
Remedy | Set the correct settings for the top margin and the paper location and print the |
| data again. (See the application software manual.) |