3

Printer Settings Menu

Show Warnings

On*, Off

This setting specifies the action to be taken if an error associated with printing an image occurs on the machine.

If [On] is selected, an error message is displayed.

If [Off] is selected, the print job is canceled and an error message is not displayed.

IMPORTANT

Depending on the error, an error message may be displayed even if [Off] is selected.

Enlarge Print Area

Off*, On

This setting specifies whether to enlarge the printable area on the paper.

If [Off] is selected, the printable area is 1/5" (5 mm) from the top, bottom, left and right edges of the specified paper size.

If [On] is selected, the printable area is enlarged close to the edge of the paper.

NOTE

If [On] is selected, images on the edge of the paper may not print properly.

Exif Adjustment

On*, Off

This setting prints Exif (Exchangeable Image File Format) image data close to the conditions when the images were taken. Images taken with digital cameras that support Exif format contain embedded shooting criteria data, such as exposure mode, white balance, flash on/off, and shooting scene data, such as shooting modes for specific subjects.

If [On] is selected, the data is adjusted, based on the embedded Exif information when printing.

If [Off] is selected, the data is not adjusted.

NOTE

•The purpose of the Exif print system is to obtain high-quality output by combining Exif-compatible printers with digital cameras that support this file format.

•This setting is only available to images that are Exif print-compatible.

3-80Imaging Settings