3

Printer Settings Menu

•The table below represents the maximum number of sheets that can be stapled. Finisher-Z1, Finisher-Y1/Saddle Finisher-Y2

Paper Size

Paper Type

Capacity

(Sheets)

 

 

 

 

 

 

17 to 21 lb bond (64 to 80 g/m2)

50

LTR, EXEC,

 

 

21 to 28 lb bond (81 to 105 g/m2)

30

A4, B5

 

28 lb bond to 60 lb cover (106 to 163 g/m2)

2

 

 

 

LGL, LTRR,

17 to 21 lb bond (64 to 80 g/m2)

30

11" x 17", A3,

21 to 28 lb bond (81 to 105 g/m2)

20

B4, A4R

 

 

28 lb bond to 60 lb cover (106 to 163 g/m2)

2

 

•If the number of sheets exceeds these limits, they will not be stapled.

•Make sure to select compatible settings when using Staple and Punch simultaneously. If conflicting settings are selected, such as the staple setting for the right side of the paper and the punch setting for the left, the machine will use neither Staple nor Punch.

Punch

Off*, Top, Bottom, Left, and Right

This setting enables you to specify the desired paper position for holes to be punched for binding.

NOTE

• This function is only available for selection if the optional Puncher Unit-M1 is attached to the optional Finisher-Y1 or Saddle Finisher-Y2. The optional Puncher Unit-M1, Finisher-Y1, and Saddle Finisher-Y2 are not available for the Color imageRUNNER C2550.

• The table below represents the paper sizes that can be punched with the puncher unit.

Puncher Type

Holes

Paper Size

 

 

 

Puncher Unit-M1

2

LGL, LTRR

 

 

3

11" x 17", LTR, A3, A4

 

 

 

 

• Make sure to select compatible settings when using Staple and Punch simultaneously. If conflicting settings are selected, such as the staple setting for the right side of the paper and the punch setting for the left, the machine will use neither Staple nor Punch.

• Holes cannot be punched in Transparency, Pre-punched, Tracing paper, Labels, and Envelope.

3-34Settings Menu