Depending on the TV set, additional settings may be required on the TV itself to activate the HDMI-CEC function. Refer to the TV’s instruction manual.

Correct operation of the HDMI-CEC function cannot be guaranteed even when connecting the camcorder to compatible TV sets. If you cannot use the remote control of the TV, set [Control for HDMI] to

[ Off] and operate the camcorder directly.

The remote control of the TV can only be used to play back movies or

photos ( or mode only). If the camcorder is connected to the TV while it is set to a recording mode, depending on the TV used, turn- ing off the TV will automatically turn off the camcorder even if it is recording at the time.

We recommend not connecting more than 3 HDMI-CEC compatible devices at a time.

[Photo Numbering]: Select the photo numbering method to be used on a new memory card. Photos are automatically assigned consecutive num- bers from 0101 to 9900, and stored in folders containing up to 100 pho- tos. Folders are numbered from 101 to 998.

[ Reset]: Photo numbers will restart from 101-0101 every time you insert a new memory card.

[ Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder.

If the memory card you insert already contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the memory card.

We recommend using the [ Continuous] setting.

The photo number indicates the name and location of the file on the memory card. For example, the file name of a photo numbered 101- 0107 is “IMG_0107.JPG”, stored under the folder “DCIM\101CANON”.

[Firmware]: You can verify the current version of the camcorder’s firm- ware. This menu option is usually unavailable.

[Reset All]: Resets all the camcorder’s settings to default values.

132 Š Additional Information

Page 132
Image 132
Canon HFR16, HFR17, HFR18, HFR106 instruction manual 132 Š Additional Information