IMPORTANT

Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the camcorder’s operating mode.

When recording photos on an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Make sure Eye-Fi cards are approved in the country or region of use.

See also Using an Eye-Fi card ( 121).

NOTES

You cannot take photos when [Frame Rate] is set to [ PF25]. Also, you cannot take photos when digital zoom is activated (light blue and dark blue area on the zoom bar).

When [Flicker Reduction] is set to [ 50 Hz] or [ 60 Hz], the camcorder will automatically adjust the shutter speed.

Selecting Photo Size and Quality

Photos are recorded as JPG files. As a general rule, select a larger photo size for higher quality. Select the [ 1920x1080] size for photos with an aspect ratio of 16:9.

Operating modes:

Options

Photo size options and the approximate number of photos that can be recorded on memory cards of various sizes are given in the following table.

FUNC. [ 1600x1200] Desired photo size* Desired photo quality* FUNC.

*Press to move back and forth between size and quality selection. The number displayed on the right corner indicates the approximate number of photos that can be recorded with the current quality/size setting.

80 Š Photos

Page 80
Image 80
Canon HFR16, HFR17, HFR18, HFR106 instruction manual Selecting Photo Size and Quality, 80 Š Photos