Canon HFR106, HFR16, HFR17, HFR18 [All Photos] [This Photo] , [Selected Photos]

92  Photos
Options
IMPORTANT
•Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
-Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• When copying photos onto an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also
Using an Eye-Fi card ( 121).
NOTES
• If the memory card slot cover is open, or the LOCK switch on the mem-
ory card is set to prevent writing, you will not be able to c opy photos to
the memory card.
• You cannot copy scenes that were edited using the supplied software
ImageMixer 3 SE and were then written back to the memory.
• If there is not enough space on the memory card, as many photos as
possible will be copied before stopping the operation.
[All Photos] Copies all the photos.
[This Photo] Copies only the photo marked with the orange selec-
tion frame.
[Selected Photos] Copies all the photos selected in advance
(marked with a checkmark). Refer to
Pre-selecting Recordings
from the Index Screen
( 49).