Canon HFR16, HFR17, HFR18, HFR106 instruction manual Adding Scenes to the Playlist, 72 Š Video

Models: HFR106 HFR18 HFR17 HFR16

1 172
Download 172 pages 61.82 Kb
Page 72
Image 72

5Select () [Yes] and press .

The video from the division point to the end of the scene will appear as a new scene in the index screen.

NOTES

When advancing/reversing frames while dividing the scenes, the interval will be 0.5 second.

If the scene cannot be divided at the point where you paused the play- back, advance/reverse a frame and then divide the scene.

During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.

The following scenes cannot be divided:

-Scenes included in the scene pre-selection (marked with a checkmark). Remove the selection mark in advance.

-Video snapshot scenes and other scenes that are too short (less than 3 seconds).

-Scenes that were edited using the supplied software ImageMixer 3 SE and were then written back to the memory.

Scenes cannot be divided within 1 second from the beginning or the end of the scene.

Editing the Playlist: Adding, Deleting, Moving and Playing Back

Create a playlist to play back only the scenes you prefer and in the order of your choice. You can play back the scenes in the playlist using your favorite song as background music ( 69).

Operating modes:

Adding Scenes to the Playlist

1Open the original movies index screen.

// You can select the original movies in the built-in memory or on the memory card.

You can press VIDEO SNAP to open the index screen for video snapshot scenes.

2Select (, ) the scene you want to add to the playlist, or a scene recorded on the date you want to add to the playlist.

72 Š Video

Page 72
Image 72
Canon HFR16, HFR17, HFR18, HFR106 instruction manual Adding Scenes to the Playlist, 72 Š Video