Cannot read the disc. Check the disc.
-During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted. Replace with a brand new disc.
-During disc playback mode, this message can appear when a commercially available DVD disc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVD burner.
Close the memory card slot cover
-The memory card slot cover is open. Close the cover after correctly inserting the memory card.
Connect the compact power adapter
-The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
Disc access failure. Check the disc.
-There was an error when reading the disc or attempting to write onto it.
-This message can appear also if condensation has formed ( 
159). Wait until the DVD burner dries completely before resuming use.
-The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it after cleaning the recording surface with a clean, soft cloth. If the problem persists, replace with a different disc.
Error reading the data
- Check that the USB cable was not accidentally disconnected.
No disc
-Insert a disc into the DVD burner.
-This message can appear also if condensation has formed ( 
159). Wait until the DVD burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
Unable to recover data
-Could not recover a corrupted file. Save your recordings ( 
104) and initialize the memory
using the [Complete Initialization] option (
35).
