6-17
List of Error Messages
Troubleshooting
6
INCORRECT PAPER SIZE
Cause It is possible that the paper size detected automatically by the paper drawer does not
match the actual paper size. Another possibility is that the paper size selected for the
stack bypass in the <NAME STACK SIZE> menu does not match the paper size
actually set on the stack bypass.
Remedy Make sure the actual paper size matches the selected paper size. Set the correct
paper size and open the front cover, then close it.
LOAD STAPLES
Cause There are few staples remaining in the staple cartridge.
Remedy Replace the staple cartridge.
MEMORY FULL
Cause The machine's memory is full of scanned documents.
Remedy Divide the original into some stacks and scan them one by one.
NO APPROPRIATE SIZE
Cause Although <AUTO PAPER> is selected when copying, appropriate-sized paper is not
set in the paper drawer nor on the stack bypass.
Remedy Select the paper size, or set the copy ratio.
If you press (Start) while this message is displayed, the paper with the least margin
is selected automatically and printing starts.
OPEN THE FRONT COVER
Cause A paper jam has occurred.
Remedy Open the front cover, and follow the procedure described on the label inside the cover
to remove the jammed paper.
OUTPUT TRAY FULL
Cause Prints from the previous job remain in the output tray.
Remedy Remove the prints from the output trays.