Canon IR1600 manual Orientation of Originals, Before You Start

1

Orientation of Originals

You can place original either vertically or horizontally. Always align the top edge of your original with the back edge of the platen glass (upper left corner) or the feeder.

[Platen glass]

Copies are stapled here. Copies are stapled here.

Using This Machine

Original

(face down)

Original (face down)

Before You Start

Vertical placement	Horizontal placement
	[Feeder]
Staple copy: place the original with its top upward
Copies are stapled here.	Copies are stapled here.

ABC	Original	ABC
		Original
	(face up)	(face up)

Vertical placement Horizontal placement

IMPORTANT

•The copies are stapled at the part equivalent to the upper left side of the original.

NOTE

•If the top edge of the original is not aligned with the back edge of the platen glass, prints may not be made correctly, depending on the mode you have set.

•A4, B5 and A5-size originals can be placed either vertically or horizontally. However, the scanning speed for

horizontally placed originals is somewhat slower than for vertically placed originals. You can place originals horizontally when printing with Preset Zoom mode, such as when processing A4 → A3 .

•Horizontally placed A4, B5 and A5-size originals are referred to as A4 , B5 and A5 .

•A3 and B4-size originals must be placed horizontally.

•To get the same output result as when the original is placed on the platen glass, place it upside-down and face up. However, when using the stapler function, the Finisher rotates the output automatically.

1-24Placing Originals