3

Selecting and Storing Settings to Suit your Needs

1 Enter the Additional Functions menu and open the <1.COMMON SETTINGS> menu.

For details about the procedure above, refer to steps 1 and 2 in “Setting Keypad Volume, Alarm Volume, Printing End Tone, and Scanning End Tone,” on p. 3-5.

2 Press or to select <6.ROTATE PRINT>, and press .

COMMON SETTINGS 6.ROTATE PRINT

When you press , the <ROTATE PRINT> menu appears.

3 Press or to select <ON> or <OFF>, and press .

If you want to print without rotation, select <OFF>.

If you want to print the original rotated 90°, select <ON>.

ROTATE PRINT

ON

4 Press (Stop) to return to the standby mode.

Setting a Dedicated Tray for Each Function

You can select the function for two output trays (Tray A and Tray B) if the optional Inner 2-way Tray-B1 is to be used.

IMPORTANT

This function can be set only when the Inner 2-way Tray-B1 is attached.

NOTE

When loaded from the stack bypass, the bond paper and transparencies are output only to Tray B. The plain paper can be output to either Tray A or B.

The factory setting is as follows:

-Tray A: <COPY> is <DO NOT USE>, <PRINTER> is <USE>

-Tray B: <COPY> is <USE>, <PRINTER> is <DO NOT USE>

If you set both trays to <USE> for a single function, Tray B will have the priority.

3-12Setting Specifications That Are Common to Each Function (Common Settings)

Page 74
Image 74
Canon IR1600 manual Common Settings 6.ROTATE Print, Rotate Print, Setting a Dedicated Tray for Each Function