Canon IR1600 manual Placing Originals in the Optional Feeder ADF-J1

1

Before You Start Using This Machine

Placing Originals in the Optional Feeder (ADF-J1)

If the machine is equipped with the optional feeder, place a stack of originals, and press (Start). The machine automatically scans them into memory.

You can place the following originals in the original supply tray:

•Weight: 38 to 128 g/m2 (set the originals one-by-one when they are very thin (38 to 52 g/m2) or very thick (105 to 128 g/m2))

•Size: A3 , B4 , A4 , A4 , B5 , B5 , A5 , A5 , B6 , 11'' ✕ 17'' , LGL , LTR , LTR , and STMT .

•Tray capacity: 50 sheets (A4 or smaller)

25 sheets (B4 or larger)

IMPORTANT

•Do not place the following types of originals in the feeder:

-Originals with tears or large binding holes

-Severely curled originals or originals with sharp folds

-Clipped or stapled originals

-Carbon-backed paper or other originals which might not feed smoothly

-Transparencies and other highly transparent originals

•Avoid scanning the same original using the feeder more than approximately 30 times. From being scanned repeatedly, the original gets folded or torn, which may cause a paper jam.

•If the feeder rollers are soiled from scanning an original written with pencil, perform the Feeder Cleaning procedure. (See “Cleaning the Feeder,” on p. 5-23.)

1Neatly place your originals face up in the original supply tray.

When enlarging A4, B5 or A5-size originals to A3 or B4-size paper, place your originals horizontally. Place the original as far as it will go, until the original set indicator is lit.

A beep sounds when the original is set correctly.

1-28Placing Originals