The below is displayed until the machine gets ready to scan.

PLEASE WAIT

The screen below is displayed when the machine is ready to scan.

100%

AUTO PAPER

01

TEXT

 

It takes about 30 seconds (at a room temperature of 20°C) for the machine to warm up.

IMPORTANT

If you turn off the main power, wait for at least three seconds before turning the main power back on.

NOTE

The standard settings are selected at power on.

The standard copy settings are as follows:

-Copy ratio: Direct (100%)

-Paper selection: Auto Paper Selection

-Copy exposure: 5

-Copy quantity: 1

You can change the standard copy settings. (See the Copying Guide.)

You can reserve a job when the display above appears. (See the Copying Guide.)

3 When a message appears on the display, follow the instructions.

If the message <ENTER DAC> appears:

ENTER DAC

_

Enter the Department ID using the numeric keys, and press .

ENTER DAC

1234567

Enter the Password.

DAC PASSWORD

✱ ✱ ✱ ✱ ✱ ✱ ✱

1

Before You Start Using This Machine

Main Power and Control Panel Power

1-17

Page 35
Image 35
Canon IR1600 manual Please Wait, Auto Paper Text, Enter DAC, DAC Password