Loading envelopes in the stack bypass

Place the envelopes on a level surface and press their edges flat.

Take the envelopes and loosen them as shown, then stack them together.

Load the envelopes as shown below (when printing on the upper side).

1

Before You Start Using This Machine

IMPORTANT

Make sure that the envelopes are not inflated with air. Press the stack of envelopes to empty the envelopes.

You cannot print on the back side of the envelopes.

Depending on the paper type or condition of the envelopes, the printing quality may deteriorate or paper jam may occur. In such a case, it is recommended to change the type of envelopes.

Making Prints Using the Stack Bypass

1-33

Page 51
Image 51
Canon IR1600 manual Loading envelopes in the stack bypass