7-6 Faxing with your machine —Basic operation Chapter 7
9Press [Set] twice.
10 Use the numeric keys to enter a name for the coded speed dialing code (max. 16
characters, including spaces).
• For details on how to enter or delete characters, see p. 7-2.
11 Press [Set].
12
To continue registering coded speed dialing codes, repeat the procedure from step 6.
-or-
Press [Stop/Reset] to return to standby mode.
NOTE
• For a list of the recipients you have registered, print the coded speed dialing list ( User’s Guide).
To change or delete an entry: Refer to the User’s Guide.

Using speed dialing

Follow this procedure to dial speed dialing number:
One-touch speed dialing:
Coded speed dialing:
If you use speed dialing to send a fax, press [Start] after dialing, or wait a few seconds for the
machine to automatically begin scanning your document for sending. If you do not want the
machine to begin scanning automatically, disable the <TIME OUT> setting ( User’s Guide).
NAME :A
09 10
1 Press the one-touch speed dialing
key assigned to the number you
want to dial (01 to 10).
09 10
1 Press [Coded Dial].
2 Use the numeric keys to enter the two-digit
code assigned to the number you want to dial
(00 to 99).