Carrier 42V, 42C, 42S, 42D specifications A42-4121

UNIT	NOM			DIMENSIONS (in. ± 1/8)									QTY/UNIT		UNIT
SIZE	AIRFLOW	A	A’	B	D’		E	F	G		H		Blower	Motor	WEIGHT*
	(cfm)														(lb)
06	600	23	32	14	131/	2	17	21	251/	4	181/	2	1	1	94
08	800	28	37	19	131/	2	22	26	301/	4	231/	2	1	1	107
10	1000	32	42	23	141/	2	26	30	341/	4	271/	2	1	1	150
12	1200	37	47	28	141/	2	31	35	391/	4	321/	2	2	2	169
14	1400	42	52	33	141/	2	36	40	441/	4	371/	2	2	2	174
16	1600	47	56	38	131/	2	41	45	491/	4	421/	2	2	2	178
18	1800	52	62	43	141/	2	46	50	541/	4	471/	2	2	2	195
20	2000	56	66	47	141/	2	50	54	581/	4	511/	2	2	2	220

*Unit weights are based on dry coils and minimum rows. Weights exclude packaging, valves, and other components.

NOTES:

1.Right hand unit shown; left hand unit opposite. Coil connection locations are ± 5/8 inches.

2.Sizes 06, 08 and 10 have one motor, one blower. Sizes 12 through 20 have 2 motors, 2 blowers.

3.Filter and filter rack are standard.

4.Standard 4-row coil shown. Other coil option dimensional data available on request.

5.For optional coil connections, view 42DA-203-1 using the Fan Coil Builder.

6.Fan switch, wall plate not shown.

7.Galvanized finish provided as standard.

8.Dimensions are in inches (mm).

LEGEND

1 — Motor Junction Box Opposite Piping

2 — Insulated Return Air Plenum

3 — Mounting Clips (Shipped Loose)

4 — Electrical Strip Heater Element (optional)

5 — Auxiliary Drip Lip (Shipped Loose) with 3/8-in. Hole

6 — Tell-Tale Drain (optional)

7 — Drain Connection, 7/8-in. OD 8 — Filter Retainer Angle

9 — Access Panel

10 — Return Duct Collar, 21/2 inches 11 — Air Vent, 1/8-in. MPT

12 — Return Connection

13 — Filter, 1-in.

14 — Supply Duct Collar, 1 inch

15 — Supply Connection

16 — Mounting Holes (four, 3/4-in. diameter) with Rubber Grommet

A42-4121

Fig. 24 — 42DC Furred-In Ceiling Unit with Plenum and Electric Heat Dimensions

27