SEE NOTE 8
| NOM | DIMENSIONS (in. ± 1/ ) | QTY/UNIT | UNIT | ||||
UNIT | AIRFLOW |
|
| 8 |
|
| WEIGHT* | |
SIZE | A | B | C | Blower | Motor | |||
(cfm) | (lb) | |||||||
06 | 600 | 23 | 21 | 15 | 1 | 1 | 135 | |
08 | 800 | 28 | 26 | 20 | 1 | 1 | 145 | |
10 | 1000 | 32 | 30 | 24 | 1 | 1 | 155 | |
12 | 1200 | 37 | 35 | 29 | 2 | 2 | 180 | |
14 | 1400 | 42 | 40 | 34 | 2 | 2 | 190 | |
16 | 1600 | 47 | 45 | 39 | 2 | 2 | 200 | |
18 | 1800 | 52 | 50 | 44 | 2 | 2 | 215 | |
20 | 2000 | 56 | 54 | 48 | 2 | 2 | 230 |
*Unit weights are based on dry coils and minimum rows. Weights exclude packaging, valves, and other components.
NOTES:
1.Right hand unit shown; left hand unit opposite. Coil connection locations are ± 5/8 inches.
2.Standard
3.Sizes 06, 08 and 10 have one motor, one blower. Sizes 12 through 20 have 2 motors, 2 blowers.
4.Supply and return connections terminate within unit when valves are factory installed.
5.For optional coil connections, view
6.Fan switch and wall plate are not shown.
7.Galvanized finish provided as standard.
8.Units with internal factory valve packages have external connections located in triangular section above coil.
9.Consult Carrier for ducted front return air and external filter rack with
10.Units with electric heat require additional access on the side of unit for servicing contactor box.
11.With bottom return, access to filter is through the front access panel.
12.Dimensions are in inches (mm).
LEGEND
1 — Motor Junction Box
2 — Air Vent,
3 — Return Connection
4 — Optional
5 — Bottom Return (optional)
6 — Return Air Opening
7 — Supply Connection
8 — Drain Connection,
10 — Filter, Throwaway
11 — Electric Strip Heater Element (optional)
12 — Supply Duct Connection,
A42-4122
Fig. 25 — 42DD Vertical Unit with Full Casing and Electric Heat Dimensions
28