Carrier 42D, 42C, 42S, 42V specifications LEGEND 1 — Unit-MountedControl Box Optional

A42-4113

LEGEND

1 — Unit-Mounted Control Box (Optional)

2 — Drain Pan, Auxiliary, Shipped Loose 3 — Air Vent, 1/8-in. MPT

4 — Supply Conn, 5/8-in. OD 5 — Drain, 3/4-in. MPT

6 — Return Conn, 5/8-in. OD 7 — Filter

8 — Electrical Sheath Heater Element

9 — Discharge Opening

NOTES:

1.Right hand unit shown; left hand unit opposite. Coil connection locations are ± 5/8-in.

2.Unit sizes 02 through 04 have one motor, 2 blowers; size 06 has 2 motors, 4 blowers.

3.Standard 2-row coil shown.

4.Optional unit-mounted switch box and controls, when specified, are installed on opposite side from cooling connections.

5.Height increases by 2 in. with electric heat.

6.Not shown: 3-speed fan switch, 1/2-in. fiberglass insulation on inside of casing, closed cell foam on main drain pan.

7.Units have galvanized finish.

8.For optional coil connections, view 42VC-203-1 using the Fan Coil

Builder.

9. Dimensions shown in inches (mm).

	NOM		DIMENSIONS (in.)			QTY/UNIT		FACE AREA	UNIT
UNIT SIZE	AIRFLOW
		A		B	C	Blower	Motor	(sq ft)	WEIGHT* (lb)
	(Cfm)
02	200	23		22	17	2	1	1.18	50
03	300	28		27	22	2	1	1.53	60
04	400	36		35	30	2	1	2.08	72
06	600	50		49	44	4	2	3.06	110

*Unit weights are based on dry coils and minimum rows. Weights exclude packaging, valves, and other components.

Fig. 19 — 42VC Furred-In Lowboy Unit with Electric Heat Dimensions

22