Carrier 42D, 42C, 42S specifications 42VA Furred-InVertical Unit Dimensions

A42-4109

LEGEND

1 — Optional Unit Mounted Control Box

2 — Wall Mounting Holes (4), 3/4-in. Diameter 3 — Drain, 3/4-in. MPT

4 — Drain Pan, Auxiliary, Shipped Loose 5 — Supply Conn, 5/8-in. OD

6 — Return Conn, 5/8-in. OD 7 — Filter

8 — Air Vent, 1/8-in. MPT

9 — Discharge Opening

10 — Flexible Conduit

11 — Front Access Panel

NOTES:

1.Right hand unit shown; left hand unit opposite. Coil connection locations are ± 5/8-in.

2.Unit sizes 02 and 03 have one motor, one blower; sizes 04 through 08 have one motor, 2 blowers; sizes 10 and 12 have 2 motors, 4 blowers.

3.Standard 3-row coil shown.

4.Optional unit-mounted switch box and controls, when specified, are installed on opposite side from cooling connections.

5.Not shown: 3-speed fan switch; wall plate, 1/2-in. fiberglass insulation on inside of casing, closed cell foam on main drain pan.

6.Units have galvanized finish.

7.For optional coil connections, view 42VA-203-1 using the Fan Coil Builder.

8. Dimensions shown in inches (mm).

UNIT	NOM		DIMENSIONS (in.)			QTY/UNIT		FACE	UNIT
	AIRFLOW							AREA	WEIGHT*
SIZE		A	B	C	D	Blower	Motor
	(Cfm)							(sq ft)	(lb)
02	200	25	22	231/	16	1	1	0.83	65
03				2
	300	29	26	271/	20	1	1	1.08	80
04				2
	400	35	32	331/	26	2	1	1.35	90
06				2
	600	45	42	431/	36	2	1	1.88	112
08				2
	800	47	44	451/	38	2	1	2.31	115
10				2
	1000	61	58	591/	52	4	2	3.16	140
12				2
	1200	69	66	671/	60	4	2	3.65	170
				2

*Unit weights are based on dry coils and minimum rows. Weights exclude packaging, valves, and other components.

Fig. 15 — 42VA Furred-In Vertical Unit Dimensions

18