Manuals / Carrier / Household Appliance / Air Conditioner

Carrier 42V, 42C, 42S, 42D specifications A42-4102

Models: 42V 42D 42S 42C

1 72

Download 72 pages 52.3 Kb

Page 7

A42-4102

LEGEND

1 — Junction Box, 4 in. x 4 in.

2 — Flexible Metal Conduit

3 — Mounting Bracket

4 — Electric Strip Heater Element 5 — Drain Conn, 7/8-in. OD

6 — Strip Heater High Limit

7 — Tell-Tale Drain Conn, 5/8-in. OD (optional) 8 — Drip Lip (optional, shipped loose)

9 — Filter

10 — Return Duct Collar, 1-in.

11 — Filter Access Panel

12 — Access Panel

13 — Supply Duct Collar, 1-in.

14 — Air Vent, 1/8-in. MPT

15 — Return Conn, 5/8-in. OD

16 — Supply Conn, 5/8-in. OD

17 — Hanger Slots (4), Rubber Grommet has

3/8-in. Diameter Hole

NOTES:

1.Right hand unit with standard 3-row coil shown; left hand unit opposite. Coil connection locations are ±5/8-in.

2.Unit sizes 02 and 03 have one motor, one blower; sizes 04 through 08 have one motor, 2 blowers; sizes 10 and 12 have 2 motors, 4 blowers.

3.Standard 3-row coil shown.

4.Unit available with bottom or rear return air.

5.Dimension increases by 4 in. with optional electric heat.

6.Not shown: 3-speed fan switch; wall plate, 1/2-in. fiberglass insulation on inside of plenum, closed cell foam on main drain pan.

7.Units have galvanized finish.

8.For optional coil connections, view 42CA-203-1 using the Fan Coil Builder.

9.Dimensions shown in inches (mm).

A42-4102

	UNIT	NOM				DIMENSIONS (in.)						QTY/UNIT		FACE	UNIT
	UNIT	AIRFLOW												AREA	WEIGHT*
	SIZE	AIRFLOW	A	A’	B	C	D’	E	F	G	H	Blower	Motor	AREA	WEIGHT*
	SIZE	(Cfm)	A	A’	B	C	D’	E	F	G	H	Blower	Motor	(sq ft)	(lb)
		(Cfm)												(sq ft)	(lb)
	02	200	211/4	311/4	16	181/4	13	193/4	61/4	83/4	153/8	1	1	0.83	57
	03	300	251/4	361/4	20	221/4	14	233/4	61/4	83/4	193/8	1	1	1.08	62
	04	400	311/4	431/4	26	281/4	15	293/4	61/4	83/4	253/8	2	1	1.35	72
	06	600	361/4	431/4	31	331/4	10	343/4	71/2	10	303/8	2	1	1.88	84
	08	800	431/4	571/4	38	401/4	17	413/4	71/2	10	373/8	2	1	2.31	97
	10	1000	571/4	651/4	52	541/4	11	553/4	71/2	10	513/8	4	2	3.16	137
	12	1200	651/4	751/4	60	621/4	13	633/4	71/2	10	593/8	4	2	3.65	156

*Unit weights are based on dry coils and minimum rows. Weights exclude packaging, valves, and other components.

Fig. 4 — 42CE Furred-In Horizontal Unit with Plenum and Electric Heat Dimensions

7

Image 7

Carrier 42V, 42C, 42S, 42D specifications A42-4102

Contents

42C,D,S,V Series Fan Coil Air Conditioners Installation, Start-Upand Service InstructionsTable 2 — Physical Data — 42V Series Units Table 1 — Physical Data — 42C Series UnitsPRE-INSTALLATION Fig. 1 — 42CA Furred-InHorizontal Unit Dimensions UNIT a42-4101 A42-4102 A42-4103 A42-4104 A42-4105 Fig. 7 - 42CG Horizontal Cabinet Unit DimensionsLEGEND 1 — Junction Box, 4 in. x 4 in A42-4149 Front Supply, and Bottom Return Dimensionsa42-4150 a42-4151 Front Supply, and Rear Return Dimensionsa42-4152 Front Supply, Rear Return, and Heater DimensionsUNIT UNIT SIZE Fig. 15 — 42VA Furred-InVertical Unit Dimensions Fig. 16 - 42VB Vertical Cabinet Unit Dimensions LEGEND 1 — Standard Stamped Supply Grille Fig. 18 - 42VC Furred-InLowboy Unit Dimensions LEGEND 1 — Unit-MountedControl Box Optional Fig. 20 — 42VE Cabinet Lowboy Unit Dimensions LEGEND A42-4116 Fig. 22 — 42VG Furred-InWall Unit Dimensionsa42-4120 A42-4121 Blower A42-4122Motor Blower A42-4123Motor A42-4124 A42-4125 Fig. 28 — 42SG Furred-InStack DimensionsA42-4126 Fig. 29 — 42SH Cabinet DimensionsA42-4127 A42-4128 Fig. 31 - 42SGM Furred-InMaster Stack DimensionsA42-4129 Fig. 32 — 42SGS Furred-InSlave Stack Dimensionsa42-4154 a42-4155 A42-4171 a42-4167a42-4169 A42-4173A42-4161 PANEL AND FRAME DIMENSIONS inA42-4168 A42-4170INSTALLATION Step 1 — Place Units in Position Risers Fig. 39 — 42SJ Unit InstallationFig. 38 — 42SJ Unit as Shipped Fig. 37 — 42SJ Unit with Standard and Siamese7.Attach unit risers Fig. 41 — Pipe Connection Configurations a42-4177 Hydronic Coil ArrangementField Piping Connections 42VGFig. 43 — Symbols and Placement of Valves COIL a42-4174Fig. 44 — Two-WayMotorized Control Valve Package a42-4175COIL a42-4176COIL COILCOIL COILCOIL COIL42D Unit Shown Fig. 48 - Typical Drain Line DetailsTable 5 — Piping Components Table 5 — Piping Components cont Table 5 - Piping Components cont SYMBOL/SKETCHTable 5 — Piping Components cont SYMBOL/SKETCHJOINT MATERIALS Fig. 50 — Manual Fan Control Fig. 51 — Thermostatic Fan Control 2-PipeSystem Remote/Wall-MountedThermostat Line Voltage a42-4060Unit-MountedDebonair Thermostat 24-v,Duct Sensor a42-4059a42-4061 Unit-MountedThermostat Line Voltage a42-4066VALVE LIMIT SWITCHTHERMOSTAT PART # THERMOSTAT #33CSSN2-FCThermostat 2-PipeTotal Electric Heat with Valve Con- trol— With this system, the complete heating requirement for the space is provided by the electric heater; the water system is never changed over for heating. It is therefore possible, just as with 4-pipesystems, to have heating or cooling at any time of the year a42-4067Unit-MountedThermostat Line Voltage a42-4073Remote/Wall-MountedThermostat Line Voltage THERMOSTAT #33CSSN2-FC a42-4072Unit-MountedThermostat Line Voltage a42-4079a42-4078 Remote/Wall-MountedThermostat Line VoltageRemote/Wall-MountedDebonair Thermostat START-UP SERVICETo Clean Coil Step 7 — Make Final Preparationsc.Reinstall fan deck if removed Page Form 42-3SI Copyright 2009 Carrier CorporationCatalog No. Printed in U.S.AI.Project Information INSPECTION, INSTALLATION, AND START-UPCHECKLISTFAN AND MOTOR