![a42-4176](/images/new-backgrounds/33740/3374093x1.webp)
On the
The aquastat (A) clips on supply line upstream from
A bypass balancing valve may be specified in the bypass line to permit equal flow balancing.
Supply and return connections at coil will be swage fit for field braze (standard) or unions (option).
Check job specifications for system pressure, pressure drop limitations and flow rate prior to selecting valve package components or valve package size (1/2 in., 3/4 in., etc.).
•2 Pipe — Hydronic Heating Only
•2 Pipe — Hydronic Cooling Only
•2 Pipe — Hydronic Cooling with Total Electric Heat
•2 Pipe — Hydronic Cooling and Heating
•2 Pipe — Hydronic Cooling and Heating with Auxiliary Electric Heat
•4 Pipe — Hydronic Cooling and Heating
LEGEND
Balancing Valve
Ball Valve
MBall Valve with Memory Stop Circuit Setter
Gate Shut Off Valve
Motorized
*When aquastat is used for automatic changeover, bypass is required as indicated by dashed line.
NOTES:
1.Packages factory furnished and installed.
2.Valves are
3.If an automatic flow control valve is added, it will be located on supply line between shutoff valve and coil (or motorized control valve, if supplied).
|
| ||
| MOTORIZED |
| |
| M |
| |
BALANCING |
|
| |
VALVE | MOTORIZED | BALL VALVE | |
| |||
(1) BALL |
| ||
(1) | R | BYPASS | |
| M | ||
COIL | S | BALL VALVE | |
|
| BALL VALVE | |
| MOTORIZED | (WITH MEMORY STOP) | |
(2) BALL (ONE WITH |
| ||
M | |||
MEMORY STOP) | |||
R | |||
(1) | M | BYPASS | |
| |||
COIL |
| ||
S | BALL VALVE | ||
| MOTORIZED | BALL VALVE | |
|
| ||
(1) GATE |
| ||
(1) BALL | R |
| |
(1) | M | BYPASS | |
COIL | S | GATE | |
| SHUT OFF VALVE | ||
| BALANCING | BALL VALVE | |
(2) BALL |
| ||
VALVE |
| ||
(1) BALANCING |
| ||
R |
| ||
(1) | M | BYPASS | |
| |||
COIL | S | BALL VALVE | |
| MOTORIZED |
| |
|
| ||
| MOTORIZED | CIRCUIT SETTER | |
(1) BALL |
| ||
| |||
(1) CIRCUIT SETTER | R |
| |
(1) | M | BYPASS | |
| |||
COIL |
| ||
S | BALL VALVE |
Fig. 46 —
47