Carrier 42D, 42C, 42S, 42V specifications A42-4124

	NOM		DIMENSIONS (in. ± 1/ )						QTY/UNIT		UNIT
UNIT	AIRFLOW					8					WEIGHT*
SIZE		A	B		C	D	E		Blower	Motor
	(cfm)										(lb)
06	600	31	131/	2	14	26	81/	2	1	1	150
08	800	36	181/	2	20	31	8		1	1	160
10	1000	40	221/	2	24	35	8		1	1	170
12	1200	45	271/	2	28	40	81/	2	2	2	195
14	1400	50	321/	2	34	45	8		2	2	205
16	1600	55	371/	2	38	50	81/	2	2	2	215
18	1800	60	421/	2	44	55	8		2	2	230
20	2000	64	461/	2	48	59	8		2	2	235

*Unit weights are based on dry coils and minimum rows. Weights exclude packaging, valves, and other components.

NOTES:

1.Right hand unit shown; left hand unit opposite.

2.Coil stub-out connection data available on request.

3.Units fabricated of galvanized steel with an Arctic White baked finish.

4.Internal parts fabricated of galvanized steel.

5.Sizes 06, 08 and 10 have one motor, one blower. Sizes 12 through 20 have 2 motors, 2 blowers.

6.Units must have drain line pitched and trapped externally.

7.Stamped supply and return grilles are not available.

8.Bottom return air is not available.

9.For optional coil connections, view 42DA-203-1 using the Fan Coil Builder.

10.Fan switch and wall plate are not shown.

11.Dimensions are in inches (mm).

LEGEND

1— Junction Box

2— Return Air Grille, Hinged, Bar Type, with Filter Frame (Anodized Aluminum Only)

3— Unit Mounting Channel (2), 14-gage; 4 Mounting Slots, 1/2 in. x 2-in.

4— Auxiliary Drip Lip

5— Electric Strip Heater Element (optional)

6— Coil Inlet, Copper Sweat Connection

7— Coil Outlet, Copper Sweat Connection

8— Manual Air Vent

9— Filter, Throwaway

10— Bottom Access Panel

11— Drain, 7/8-in. OD

12— Drain Pan Insulated with Styrofoam

13— Side Access Panel (2)

14— Supply Air Grille (Double Deflection)

A42-4124

Fig. 27 — 42DF Exposed Ceiling Unit with Supply and Return Grille and Electric Heat Dimensions

30