Displaying the FC-to-SCSI Address Map | Chaparral FS2620R specs

FS2620R Rack Model User’s Guide

To display the devices connected to the router:

1From the System Menu, select Display Devices and press Enter. The Display Devices screen displays.

2Press Esc to return to the System Menu.

Displaying the FC-to-SCSI Address Map

You can display the FC-to-SCSI address map for all of the SCSI devices connected to the router. The address map includes the following information for each device:

✁FC LUN

✁Device ID (Channel number:SCSI ID:LUN)

✁Bytes 8 through 31 of the standard SCSI inquiry data, which normally includes:

–Vendor ID

–Product ID

✁Mapping mode

The address map lists devices in ascending order based on the FC LUN, including the router itself if it has an FC LUN assigned to it.

For additional information about address mapping, see Appendix A, Address and Device Mapping.

To display the address map:

1From the System Menu, select Address Mapping and press Enter. The Address Mapping screen displays.

3-28

Image 58

Chaparral FS2620R manual Displaying the FC-to-SCSI Address Map, To display the devices connected to the router

Contents

User’s Guide Page Copyright Canadian Compliance Statement Safety Page Contents Address and Device Mapping Reference Documents FS2620R Rack User’s Guide Viii Introduction About this Guide Conventions Chaparral FS2620R Router Benefits and FeaturesBold Chaparral FS2620R Router Benefits and Features About Serverless Backup and Restore Specifications Physical Environmental Unpacking the Router To unpack the router Installing in a Rack Installing the RouterInstalling on a Desktop To install the FS2620R on a desktop Connecting the Router To install the router in a rack Connecting to the Scsi Channels Rear panel components To connect devices to the Scsi channels Connecting to the Fibre Channel PortTo connect to the Fibre Channel port Connecting to the RS-232 Port To connect to the RS-232 port To power up Scsi devices Powering Up All DevicesConnecting to the Ethernet Port To connect to the Ethernet port Understanding the LED Status Lights To make the host FC connection Description Color Function Label Router Default Settings Setting Default For more information, see Installation Configuration Examples Simple loop configuration example Multiple servers on a SAN FC-AL Multiple SANs with fabric FC-SW Combination loop and switch configuration Configuring the Router Accessing the Router Administrator Software FS2620R Rack Model User’s Guide Accessing the Router Administrator Using the Ethernet Port FS2620R Rack Model User’s Guide Configuring the Router’s Network Settings System Configuration Screen Snmp Configuration Screen Restarting the Router Navigating the Router Administrator Software To access the network management system Menu Tree illustrates the main menu options and sub-options Changing Router Configuration Changing the Screen Display Configuring the FC Host Channels To configure an FC host channel Select Enabled or Disabled and press Enter Changing Router Configuration System confirms that you want to make the changes Changing the Scsi ID Assigned to Each Router Channel To change the Scsi ID assigned to a Scsi channel FS2620R Rack Model User’s Guide Setting the Date and Time To set the router’s date To set the router’s time Enabling and Disabling the Alarm Changing the Scan DelayTo change the scan delay To enable or disable the alarm Alarm threshold What to do when the alarm sounds To restore the default settings Rebooting the RouterRestoring the Default Settings Select Restore Defaults and press Enter To change the mapping mode Changing the Mapping Mode Auto or FixedChanging and Displaying Device Information Select Mapping Mode press Enter Changing Device Addresses FC LUNs See Changing the Mapping Mode Auto or Fixed on To change the device FC LUNs Displaying the Devices Connected to the Router Changing Addressing MethodSelect Addressing Method and press Enter To display the devices connected to the router Displaying the FC-to-SCSI Address MapTo display the address map Displaying Router Information Displaying the Event Log To display one event at a time Select View Event Log and press Enter Capturing the Event Log File To display a full page of events Displaying Hardware and Configuration Information To capture the event log file Gbic To display hardware information only To display hardware and configuration information To display the router’s LUN Displaying the Router’s FC LUNSelect Display Address Map and press Enter Upgrading Firmware To upgrade the router’s firmwareUpgrading the Controller’s Firmware To upgrade the Ethernet card’s firmware Upgrading LAN Firmware Upgrading Firmware FS2620R Rack Model User’s Guide Problems During Bootup Chaparral Technical Support FS2620R Rack Model User’s Guide To restore the default configuration Select 2. Clear Configuration and press Enter Terminal Emulator and COM Port Problems Solution Device Scsi Channel Problems Router is Not Responding Setting Up Debug Logging To set up debug logging Using the Loader Utility Menu Using the Loader Diagnostics MenuVoltage and Temperature Errors and Warnings FS2620R Rack Model User’s Guide Address and Device Mapping Loop ID to Alpa Mapping Device ALP 114 115 116 117 118 119 120 121 122 100 123 101 124 102 125 Configuring the Router for TCP/IP Using Address Resolution Protocol To use ARP to resolve addresses in Windows Dynamic Host Configuration Protocol ConfigurationArp -s IP address 005013fx-xx-xx Simple Network Management Protocol Configuration To discover which IP address was assigned to the router FS2620R Rack Model User’s Guide Reference Documents Standards Books SBP Glossary G6322/G7324 User’s Guide Glossary G6322/G7324 User’s Guide Index Dhcp Page FS2620R Rack Model User’s Guide TCP/IP FS2620R Rack Model User’s Guide